Specifications
Setting Parameters
Mode: Assist/Control, SIMV, SPON
Volume: Adjustable from 50 to 2200 mL (1750 mL SIMV)
Inspiratory Time: Set time from 0.2 to 5.0 seconds
Sensitivity: Set flow from 3 to 25 L/min. Set pressure to Off, or from 1 to 15 em H,O/hPa.
Breath Rate: Set breathing rate: 1 to 80 BPM
Pressure: Set for 0 to 50 cm H,O/nPa
PEEP: Set for 0 and 3 to 20 cm H0/hPa
Low Pressure: Set for 1 to 59 cm H,O/nPa
High Pressure: Set for 2 to 60 cm H,O/MPa
Level: Set 21% to 100%
Flow: 2.0 L/min to 150 L/min (averaged)
Alarms
Low Pressure/Apnea, High Pressure, Setting Error,
Power Switchover, Low Power, 0, Fallure
Alerts
External Battery, Internal Battery,
Alarm Control, Assist Spontaneous
Front Panel Controls/Connections
Alarm Silence/Reset, Battery Test, Standby, Ventilate, Menu/Esc, StarEnter, Up and Down Arrow Keys, Patient Pressure Port, Patient Air Port: 22 mm 0.0.15 mm |.D. and Exhalation Valve Port
Rear Panel Components
Inlet Filter, External Battery, Communication Port (RS232), Remote Alarm, Nurse Call Port, Modem Jack, Power Entry Module and 0, Port: 9716-18, Diss 1240 THD
Physical Characteristics
Dimensions: 10.75 in Hx 19.30 In Wx 18.60 in D (27.3 cm x 33.8 cm x 39.6 cm)
Weight: Less than 32 Ib
Environment
Operating: 576 to 40°C (41°F to 104°F), 10% to 90% RH non condensing
Operating Altitude: Set from 0 to 4500 m_
Storage: -20°C to 50°C (-4°F to 12°F), 10% to 90% RH non condensing; allow at least 1 hour temperature stabilization before use when moving from nonoperating to operating environment; the battery must be recharged every 30 days
Electrical Characteristics
Power Line: 100-240 VAC, 50/60 Hz, universal AC Input
Power Usage: Maximum - 75 W / Minimum - 10 W
Internal Battery: At least 4 hours operation under normal load; backup use only
Optional External Battery: Approx. 20 hours operation under normal load